SEMA 2014: SuperFlow Now US Source For Hubdyno Chassis Dyno

Chassis dynamometers driven directly by the vehicle’s wheels have been instrumental in OEM development for years but not readily available to aftermarket tuners in the United States. Not anymore.

SuperFlow announced at the SEMA Show that it will be the North American distributor for the Hubdyno, which is manufactured in Sweden by Rototest.

“It’s a company that’s been in business for 25 years,” says Mike Giles of SuperFlow.

A 2-wheel-drive test requires a pair of Hubdyno units linked with large hydraulic hoses that feature quick-disconect fittings. There’s also a massive cooling unit and a control cabinet housing the data acquisition and display monitor. A 4-wheel-drive setup adds two more Hubdyno units and an additional cooling unit. The entire system is fully portable and can be set up virtually anywhere.

“You don’t need to dig a hole in the ground or have a vehicle lift,” says Giles. “You could put this system in a trailer and set it up in a parking lot during a car show.”

Two views of the Hubdyno on display at SEMA in the Superflow booth.

Besides enough real estate to support the vehicle footprint and cooling units, all that’s needed is a 120-volt line, which could be delivered from a portable generator.

“You don’t even need straps to tie down the vehicle,” adds Giles.

Of course, you will need a jack and wrench to remove the tires, then simply bolt each unit directly to the vehicle’s drive hubs. Each unit has its own coil-over suspension to guarantee minimal vibrations and a consistent testing environment. Just as with traditional roller dynos, different tests such as sweep or steady-state can be conducted.

“This is truly a dynamic test,” says Giles. “These unit self adjust for caster or camber.”

The cooling towers perform double duty in not only providing up to 85 mph of air to the radiators but also cooling the system’s hydraulic fluid.

As you can see, the Hubdyno removes any possibility of tire slip, tire pressure or tension load of the safety straps affecting the dyno results.

The dyno is rated for a maximum of 1,005 horsepower in 2WD trim and 1,510 horsepower in 4WD. Max torque is 2,801 lb-ft and 4,425 lb-ft, respectively. It also has a max road speed of 213 mph for normal-sized tires and 249 mph for larger tires. Max axle weight is 6,613 pounds.

The Hubdyno is considerably more expensive than a premium roller chassis dyno. US pricing hasn’t been confirmed, but there are no additional costs such as building a dyno cell. And, according to Rototest, numerous customers have made a full return on their investment after only one year.

Article Sources

About the author

Mike Magda

Mike Magda is a veteran automotive writer with credits in publications such as Racecar Engineering, Hot Rod, Engine Technology International, Motor Trend, Automobile, Automotive Testing Technology and Professional Motorsport World.
Read My Articles

Horsepower delivered to your inbox.

Build your own custom newsletter with the content you love from EngineLabs, directly to your inbox, absolutely FREE!

Free WordPress Themes
EngineLabs NEWSLETTER - SIGN UP FREE!

We will safeguard your e-mail and only send content you request.

EngineLabs

EngineLabs

We'll send you raw engine tech articles, news, features, and videos every week from EngineLabs.

EngineLabs

EngineLabs NEWSLETTER - SIGN UP FREE!

We will safeguard your e-mail and only send content you request.

EngineLabs

EngineLabs

Thank you for your subscription.

Subscribe to more FREE Online Magazines!

We think you might like...


LSX Mag
Late Model LS Vehicles
Dragzine
Drag Racing
StreetMuscle
Muscle Car & Hot Rods

EngineLabs

Thank you for your subscription.

Subscribe to more FREE Online Magazines!

We think you might like...

  • LSX Mag Late Model LS Vehicles
  • Dragzine Drag Racing
  • Street Muscle Mag Muscle Car & Hot Rods

EngineLabs

EngineLabs

Thank you for your subscription.

Thank you for your subscription.

EngineLabs

Thank you for your subscription.

Thank you for your subscription.

Loading