Tale Of The Tape: We Compare The LSR Block To A Factory 6.2L LS

Tale Of The Tape: We Compare The LSR Block To A Factory 6.2L LS

We have been dreaming of ways to fully utilize the capabilities of the Concept Performance LSR block in one of our project vehicles since we laid eyes on it six years ago. Well, we finally have such a vehicle in LSX Mag’s Project McLuvin. We’re using the LSR block as the foundation for a Whipple-supercharged 427 cubic-inch LS build to power our all-wheel-drive 1976 Chevy Luv street terror. Upon receiving our LSR block, we wanted to compare it side-by-side with a factory GM 6.2L block and show our readers the differences.

The LSR block is packed with features and strength to make it an excellent choice for making four-digit horsepower. Additionally, it is cast and machined in the USA at Concept Performance's facilities in Indianapolis, Indiana.

More Than Just Another Aluminum Block

The Concept Performance LSR engine block is a premium aftermarket product for LS enthusiasts who want to build high-horsepower engines using an aluminum block. Traditionally, enthusiasts have chosen iron blocks for engine builds that see four-digit horsepower output. The reason is that iron is very strong and resists distortion under high loads. However, before you think the LSR is just an aluminum recreation of something like the iron LSX block, understand that Concept Performance has engineered its LSR block with even more strength and features.

LSR block

Looking at the LSR, on the engine stand it’s apparent from any angle that this block is strong. There is reinforcing webbing and added thickness everywhere when compared to a factory 6.2L block.

The LSR block is cast in the USA using 356-T6 heat-treated aluminum with spun ductile iron sleeves and weighs only 113 pounds with its billet-steel main caps. Although the LSR is on par with the weight of a factory aluminum LS block, its horsepower capabilities far exceed any factory aluminum offering. Additionally, the LSR is over 100 pounds lighter than a comparable iron block. When deciding on the route to take with Project McLuvin, it was a no-brainer choosing the LSR over the factory 6.2L block we had in the shop, considering we expect our engine to be in the 1,200- to 1,400-horsepower range, and it will likely see a lot of heavy-footed use. We’re confident the LSR will have zero issues in our build considering these blocks are used on engines making 2,000-plus horsepower.

Here you can see the webbing and thickness of material on the LSR (left) compared to the valley design of the factory 6.2L block (right).

Stronger From Top To Bottom

One of the main advantages of the LSR block is its reinforced structure. It has significant cross-bracing in the lifter valley with triple bracing through the sides of the block. In addition, there are no windage windows found under the crank saddle like on other blocks. The LSR is solid through that area to create a stronger crank saddle, and a radius is machined where it meets the skirt wall. According to Concept Performance, this helps with strength by removing the sharp corner typically in that location on other blocks.

The LSR (left) has a radius machined into the area where the crank saddle meets the skirt wall. According to the experts at Concept Performance, any sharp corner is a breaking point, and by removing the sharp corner in this area it adds strength over other blocks like our factory 6.2L (right) piece.

The strength improvements don’t stop there. The main caps are made from billet 1045 steel in either a six- or eight-bolt design and include ARP hardware. The eight-bolt main caps have a double cross-bolt configuration and a 40-percent larger main cap surface for enthusiasts that want to push the LSR to the max. This design increases the rigidity and durability of the block under high cylinder pressures to prevent distortion and cracking. Our LSR has the six-bolt main cap option, which is plenty strong for the power level we’re going for with boost from a Gen-5 3.0L Whipple supercharger.

The 1045 billet steel main caps on the LSR (left) are noticeably bigger than the factory main caps (right). You can also see where Concept Performance removed the windage holes on either side of the crank saddle area for added strength.

Build It Your Way

Another benefit of the LSR block is its versatility and compatibility. It is offered in two deck heights depending on your needs: standard (9.240 inches) and tall (9.720 inches). The standard deck height matches the factory GM 6.2L engine block, while the tall-deck-height block has a raised cam bore and allows for more stroke and displacement options. Because we are keeping the displacement to 427 cubic inches, we opted for the standard deck height. All LSR blocks feature a six-bolt cylinder head pattern and can also accept standard four-bolt cylinder heads. Additionally, all OEM LSX parts, such as covers, pans, and accessories, work seamlessly with the LSR block.

In the cylinder bore area and deck surface you can see there is additional material thickness and strength in the LSR (left) compared to the 6.2L (right).

A design feature we found to be much appreciated is the access area in the lifter valley. These windows allow for the removal of the lifters without needing to remove the cylinder heads. If a lifter needs replacing, only the intake and valley cover are removed to gain access to the lifters. Speaking of lifters, the bore comes standard sized but can be machined to accept lifter bushings as large as .904-inch. They can also be machined for keyway-style lifters if desired.

A helpful feature on the LSR (left) is the windows in the lifter valley area. These windows make lifter removal possible without needing to remove the cylinder head. By pulling the intake manifold and valley cover you have access to the lifters for maintenance or replacement. The factory 6.2L block (right) requires the removal of the complete cylinder head to access the lifters.

The LSR can accept a maximum bore size of 4.200 inches. Combined with a maximum stroke of 4.250 inches on the standard-deck block, you could have a whopping 467 cubic inches of displacement. As much as a big cubic inch build intrigues us, we are using a 4.125-inch bore and a 4.000-inch stroke in our engine build to be at 427 cubic inches.

The lifter bore area on the LSR (left) features more material for added strength compared to the factory 6.2L block (right). Additionally, the small oiling hole on the LSR can be plugged if using mechanical lifters.

What The Future Holds For Our LSR Block

For our project, it is important to point out that the LSR has a seventh transmission bolt-hole on the back side of the block. This opens up our choices to pre-LS transmissions. We have not completely settled on a gearbox yet, but it’s nice to know we can use anything from a two-speed Powerglide to an electronic ten-speed, or a manual transmission if we decide to row the gears ourselves.

Now that we have our hands on the LSR block and can see up close all of the improvements and features that Concept Performance has designed into it we are excited to get our engine assembled and fired up. Currently, we have everything for our short-block assembly at our engine builder being machined and prepped to go together. As we get closer to our supercharged 427 LSR being completed and ready to dyno we will bring you updates. So check LSX Mag often as we make progress on getting this LSR monster in Project McLuvin.

Article Sources

About the author

Jeremy Nichols

Jeremy loves to go fast, whether that's on two wheels, four wheels, or boating. With a willingness to compete at almost anything, Jeremy shoots competition long-range rifles matches and races road bicycles and enjoys building vehicles for people.
Read My Articles

Horsepower delivered to your inbox.

Build your own custom newsletter with the content you love from EngineLabs, directly to your inbox, absolutely FREE!

Free WordPress Themes
EngineLabs NEWSLETTER - SIGN UP FREE!

We will safeguard your e-mail and only send content you request.

EngineLabs

EngineLabs

We'll send you raw engine tech articles, news, features, and videos every week from EngineLabs.

EngineLabs

EngineLabs NEWSLETTER - SIGN UP FREE!

We will safeguard your e-mail and only send content you request.

EngineLabs

EngineLabs

Thank you for your subscription.

Subscribe to more FREE Online Magazines!

We think you might like...


LSX Mag
Late Model LS Vehicles
Dragzine
Drag Racing
StreetMuscle
Muscle Car & Hot Rods

EngineLabs

Thank you for your subscription.

Subscribe to more FREE Online Magazines!

We think you might like...

  • LSX Mag Late Model LS Vehicles
  • Dragzine Drag Racing
  • Street Muscle Mag Muscle Car & Hot Rods

EngineLabs

EngineLabs

Thank you for your subscription.

Thank you for your subscription.

EngineLabs

Thank you for your subscription.

Thank you for your subscription.

Loading