Video: Delving Into BMW’s Most Powerful F1 Engine

Many might remember the amazing shriek of the BMW V10 powering the Williams F1 cars from 2000-2005. The motor was regarded as the most powerful for the time, as it spat out close to 1,000 horsepower. However as impressive as those figures are, the auto titan produced a powerplant two decades earlier with even more power and half the size. Firey, unreliable, and incredibly impressive, BMW’s M12/M13 engine helped define the most excessive era in Formula One, and it did it all with a block from a humble road car.

The M10 from a BMW 1500 Neue Klasse was what laid the foundation for the M12/M13. Only four cylinders producing a meager 80 horsepower, this anemic powerplant started life in the sixties to get a small sedan from point A to B, and certainly, the engineers at BMW probably had no idea that they would, in the span of two decades, stretch the potential of this motor as far as they did.

From the sixties onwards, the governing bodies demanded that the engines in Formula One machines maintain displacements of either 3.0 liters naturally aspirated, or 1.5 liters with forced induction. While BMW had no intent of turning their modest M10 into a fire-spitting monster, a small intermediary development opened the doors for big-budget racing in the world’s most prestigious racing category.

http://www.simpleimageresizer.com/_uploads/photos/c9317da8/06_BMW_Museum_640x.jpg

Carbon-wrapped turbos aren’t something you see everyday.

That second step came in the form of a small, unassuming sedan. While in the States, the Chevrolet Corvair had little success as one of the first production cars fitted with a turbocharger, but several years later, it was the nimble, boxy BMW 2002 Turbo that enjoyed success as the first turbocharged production car in Europe. Once this car made its way onto the market, people began to understand the potential the turbocharger had in production cars and sports cars.

Still, it was a stretch to consider that this engine would eventually win a Formula One World Championship. Again, one step was required before this production car-based motor would ever reach the upper strata of motorsport. BMW engine guru Paul Rosche began using a 1,400 cc version of this motor to compete in DTM, and though its drivability and reliability weren’t enviable, the 350 horsepower it produced off the bat illustrated the potential this powerplant had.

With this indication, the bright minds at BMW began developing the M12 for Brabham’s Formula One car. In it’s first season, the BMW engine ran in one car while their dependable, but soon-to-be-obsolete Cosworth DFV — a N/A V8 – was used in another. Teething problems kept the car from seeing much success in 1982, though the potential was there — Nelson Piquet won the Canadian Grand Prix that year. However, the following year, while comparatively unreliable, the BMW engine was stout and fast enough to secure three wins and the championship.

http://cdn05.motorsportretro.com/wp-content/uploads/2009/08/brabham_bt_52.jpg

The power delivery of the M12/M13 was so abrupt that the Brabham designers shifted an outrageous amount of weight to the rear, in hope of aiding in traction.

Many of the multinationals with tailor-made race engines could hardly believe that a road car engine fitted with a turbocharger could work well enough to win. After 1983, the Turbo Era was well underway and in various guises, the BMW M12 and M13 made its way into a variety of other F1 cars, including the contemporary Benettons and Arrows. Though the BMW engine never won another championship, it remained a competitive motor, especially on faster tracks were the turbo lag and monstrous power delivery were less of an issue.

The M12/M13 helped define the turbo era of the 1980s. Excessive, outrageous and spectacular, these fire-breathing monsters were capable of spinning the tires in just about any gear, set new outright speed records at every track they attended, costs millions to develop, and lasted a very short time. In fact, the qualifying specials made for the attainment of pole position were run with their wastegates blanked off, resulting in 80 pounds of boost pressure and somewhere around 1,300 horsepower. These engines, nicknamed “grenades”, would last all of four laps before melting on their way back to the pits. Excessive? Certainly, but it shouldn’t have been any other way.

https://s-media-cache-ak0.pinimg.com/736x/c0/22/ff/c022ff2fda77cecc2305bae42b333538.jpg

The small size of the motor belied its enormous power.

About the author

Tommy Parry

Tommy Parry has been racing and writing about racing cars for the past seven years. As an automotive enthusiast from a young age, he worked jobs revolving around cars throughout high school, and tried his hand on the race track on his 20th birthday. After winning his first outdoor kart race, Tommy began working as an apprentice mechanic to amateur racers in the Bay Area to sharpen his mechanical understanding. He has worked as a track day instructor and automotive writer since 2012, and continues to race karts, formula cars, sedans, and rally cars in the San Francisco region.
Read My Articles

Horsepower delivered to your inbox.

Build your own custom newsletter with the content you love from EngineLabs, directly to your inbox, absolutely FREE!

Free WordPress Themes
EngineLabs NEWSLETTER - SIGN UP FREE!

We will safeguard your e-mail and only send content you request.

EngineLabs

EngineLabs

We'll send you raw engine tech articles, news, features, and videos every week from EngineLabs.

EngineLabs

EngineLabs NEWSLETTER - SIGN UP FREE!

We will safeguard your e-mail and only send content you request.

EngineLabs

EngineLabs

Thank you for your subscription.

Subscribe to more FREE Online Magazines!

We think you might like...


LSX Mag
Late Model LS Vehicles
Dragzine
Drag Racing
StreetMuscle
Muscle Car & Hot Rods

EngineLabs

Thank you for your subscription.

Subscribe to more FREE Online Magazines!

We think you might like...

  • LSX Mag Late Model LS Vehicles
  • Dragzine Drag Racing
  • Street Muscle Mag Muscle Car & Hot Rods

EngineLabs

EngineLabs

Thank you for your subscription.

Thank you for your subscription.

EngineLabs

Thank you for your subscription.

Thank you for your subscription.

Loading