If you haven’t signed up yet for the two-day, online Engine Performance Expo yet, why not?! Free to register, the Expo has a jam-packed full two-day agenda filled with seminars, demonstrations, and question & answer sessions from some of the industry’s best and brightest, including Scooter Brothers, Jon Kaase, John Callies, Ben Strader, Lake Speed, Jr., Ed Kiebler, Mark Cronquist, and Randy Neal, just to name a few.

Regardless of what part of the industry you’re in, there will be something for you. Maybe you’re interested in what it takes to make 1,000 horsepower with a stock-stroke. Or, you’re more into the machining side of engine building and are curious about the difference between align boring and align honing or how feeds, speeds, and lubrication influence surface finish. Maybe you’re more interested in the business side of the industry, in which case there are several seminars on that topic.

Whether you are interested in the old-school ways, or the latest and greatest technology, the Engine Performance Expo has something for you. All you have to spend is time, and all you have to pay is attention. Make sure to register HERE, and check out the full two-day schedule below.

Times are all EST (GMT -5)

DAY 1 – OCTOBER 13, 2021

9:30 – 10:00AM: Online Expo Center opens
10:00AM: Welcome and Introduction of the show format
10:10 – 10:35AM: Get Boosted – What will it take to make 1,000 HP with a stock stroke?
10:40 – 10:55AM: Tech 101 — Align Boring Vs. Align Honing
11:00 – 11:55AM: Engine Builder Interview — Jon Kaase
12:00 – 12:25PM: Anatomy of a Hydraulic Roller Lifter with John Callies
12:30 – 12:55PM: Engine Business Opportunities with Chris Straub
1:00 – 1:55PM: Engine Builder Interview — Roy Johnson
2:00 – 2:55PM: Tech 101 — How Feeds, Speeds and Lube Influence Surface Finish with Q&A
3:00 – 3:25PM: Advanced Technology Feature — REM Finishing
3:30 – 3:55PM: Pros and Cons of the Duramax Platform with Guy Tripp of SoCal Diesel
4:00 – 4:25PM: Blockwork with Dart
4:30 – 4:55PM: SAM Tech – Racing Program students porting heads, CNC work, working back to Mastercam
5:00 – 5:55PM: Engine Builder Interview — Larry Clark
6:00 – 6:25PM: Daily Roundtable

DAY 2 – OCTOBER 14, 2021

9:30 – 10:00AM: Online Expo Center opens
10:00AM: Welcome and Introduction of the show format
10:10 – 10:25AM: Tech 101 — Bore Geometry
10:30 – 10:55AM: Balancing the short block
11:00 – 11:55AM: Engine Builder Interview — Scooter Brothers
12:00 – 12:20PM: 3D Printing & Digitizing – Saving Spindle Time & Speeding Development
12:25PM: Lifetime Achievement Award — Ed Iskenderian
12:30 – 12:55PM: Business Operations — Time Is Money; Putting Automotion & Tech To Work
1:00 – 1:55PM: Engine Builder Interview — Warren & Kurt Johnson
2:00 – 2:25PM: Welding 101 – Do’s and Dont’s of Aluminum Welding; Block Repair with Jeff Jacobs @ Tim Wilkerson’s
2:30 – 2:55PM: Tech 101 — Engine Bearings with Dan Begle
3:00 – 3:25PM: Advanced Technology Feature — V-Twin with George Bryce
3:30 – 3:55PM: Pros and Cons of the Powerstroke with Cass Choate
4:00 – 4:25PM: Parts Supply Roundtable with engine builders on overcoming parts supply issues
4:30 – 4:55PM: Career — AERA ERF / Free Online Resources, programs, podcasts, etc.
5:00 – 5:55PM: Engine Builder Interview George Bryce
6:00 – 6:25PM: Daily Roundtable