CV Products Offers Time On Spintron Valvetrain Test Machine

Every racer wants to get the most out of their engine without destroying it in the process. There is nothing worse than a good run cut short leaving a trail of fluids in your wake. Our Friends at CV Products now offer engine builders the opportunity to take a look inside of their power plant to see exactly where these catastrophic issues begin.

The Spintron has the ability to turn the valvetrain through the entire rpm range. The computer-controlled device also gives users direct feedback of internal parts both visually and graphically. Taking the guess work out of valvetrain building and tuning. Users are now able to identify, document and make appropriate changes with solid information courtesy of this technology.

What is referred to as the “spin fixture” also has the ability to provide feedback for bolt-on components as well. Using a variety of sensors to collect data including vaccum, flow, and pressure readings. While putting the motor through it’s paces users receive vital information about how their oil pump, fuel pump and power steering units are performing. 

Not only does this information allow for the ability to increase engine reliability, power can also be increased. Identifying issues such as “valve bounce’ to allow for  greater stability during the higher rpm range of your valvetrain. What may be most valuable of all is the confidence in your powerplant to handle the rigors of all the stresses it endures on the track. 

Based in Thomasville, North Carolina, Clyde Vickers started CV Products in 1988 to provide supplies for racers on a regional level. CV now provides products and services for everything from Jr. dragsters to the highest of levels of stock car competition. For more detailed information on CV Products and how you can take advantage of the Spintron test machine visit www.cvproducts.com.