What I Learned Today With Jeff Smith — Check What? Check WOT!

This sounds ridiculously basic, but over the years we’ve seen many examples where the car owner/tuner has made changes to the engine and neglected to re-check the maximum throttle opening — better known as wide-open throttle (WOT). We recently visited our friends at Westech in California where Steve Brule was testing a 512ci Mopar Wedge street engine.

The first pull for power on this engine revealed well over 640 lb-ft of torque and over 620 horsepower. On the second pull, the power dropped slightly with an even further loss of power on the third attempt. After checking the obvious things like a spark plug wire off, a dead cylinder, or a rocker out of adjustment and with no metal in the oil, Steve was pondering his next move when he discovered the carburetor mounting studs were loose.

With the carb not tight, this allowed it to move laterally because the carburetor used one of those universal throttle plates drilled for both the standard Holley 4150 and Dominator 4500 bolt patterns. When the carburetor moved, it also moved the throttle linkage which prevented WOT. Steve readjusted WOT and on the next pull the power picked up over 30 lb-ft of torque and a similar horsepower increase. The adjustment was quick and easy and the resulting power increase was impressive despite the minor difference in throttle opening.

To reinforce this approach, the guys who run the chassis dyno at Westech Eric Rhee and Ishmael Candia tell me that anytime they pull a car onto the electric rollers, the first thing they always check is WOT, especially with street-driven cars. They often discover the throttle linkage needs major adjustment. With engines, as with life in general, it’s the little things that can make a big difference. Especially when it really is free horsepower.

Checking WOT

It only takes a moment to remove the air filter, have a friend bury the throttle pedal from the driver’s position and look straight down through the carburetor (with the engine not running of course) to make sure the throttle blades are fully open.

Article Sources

About the author

Jeff Smith

Jeff Smith, a 35-year veteran of automotive journalism, comes to Power Automedia after serving as the senior technical editor at Car Craft magazine. An Iowa native, Smith served a variety of roles at Car Craft before moving to the senior editor role at Hot Rod and Chevy High Performance, and ultimately returning to Car Craft. An accomplished engine builder and technical expert, he will focus on the tech-heavy content that is the foundation of EngineLabs.
Read My Articles