[1]
Getting a new product installed in a vehicle can seem like a no-brainer to most of us, but when it comes to wiring that is a whole different animal. The folks over at C&R Racing [2] have developed a line of wiring harnesses and installation kits to simplify the installation of electric fans.
[3]
[4]
The billet enclosures are available in two or three relay models. Each housing securely attached the relay and has a rubber grommet to protect the wires.
Each installation kit features 40-amp relays inline fuse and burn-resistant polyethylene wire. Additionally, pull-tested crimping is used in the harnesses construction for increased durability. All the kits come with diagram-illustrated instructions and a billet mounting kit. Best of all, the entire kit is made right here in the USA.
Gone in the wind are the days of mounting relays with a self-tapping screw. “The relays are mounted in an enclosed box,” Roger Rosebush of C&R Racing explained. “This keeps the terminals covered, protected any time the engine bay is washed, and makes for a cleaner install.”
[5]
[6]
Within each kit there is a wiring diagram like the ones above that will help with the visual part of the installation.
The kits are available in either a single fan or dual fan option and with or without air conditioning. The harnesses can be used with old or new style air compressors and come with a 40-amp relay.
For more information on all of C&R Racing’s products be sure to visit its website [2].
[7]