Video: Aussie Pro Stock Motor At 10,500 RPM On The Dyno

Down in Australia, where they take their drag racing every bit as seriously as we do here in the states, they just do everything a little bit different. And when we say different, what we really mean is exciting. This goes for their Pro Stock division, as well, which one might argue isn’t near as intriguing as the 500 and 800-plus cubic inch Pro Stock cars we have here in the NHRA, ADRL, and X-DRL, but that’s all a case of personal preference. A fact that can’t be argued, however, is just how downright impressive the Pro Stock cars that compete in the Australian National Drag Racing Association truly are.

With a limitation of “just” 400 cubic inches, these small block-powered rockets put down some incredible numbers. This is in large part to a lot of crossover technology and engine development work by some of the top NHRA Pro Stock engine builders here in the states, including the folks at Reher-Morrison, who finds ways to squeeze mind-boggling power and torque numbers out of an engine that, while not stock by any means, is at least within the realm of a production engine in terms of sheer cubic inches. Down 100 cubes to their NHRA counterparts, the ANDRA Pro Stock class has see racers dip into the 6.90’s.

The Reher-Morrison team, working with Aussie Gerry Parente and his Parente Motorsports team on the powerplant for their Pro Stock entry, recently flogged the 400-inch bullet on the engine dyno and captured this video clip that’s perhaps most impressive because you can hear the small block bullet as it’s taken north of 10 grand, all the way up to 10,500 RPM, where it spits out a staggering 1,150 horsepower. What a frontrunner 500 cubic inch motor makes on the dyno is a we-could-tell-you-but-we’d-have-to-kill-you fact, but rumors in years past suggested in the neighborhood of 1,350 horsepower, so 1,150 from 100 less cubes is quite impressive any way you look at it.

We still miss the Pro Stock Trucks and their high-winding small block powerplants, so we’d hate to have to pick between the 400 and 500 cubic inch variants, but they’re both equally as entertaining, even if one is some half a second quicker than the other.

About the author

Andrew Wolf

Andrew has been involved in motorsports from a very young age. Over the years, he has photographed several major auto racing events, sports, news journalism, portraiture, and everything in between. After working with the Power Automedia staff for some time on a freelance basis, Andrew joined the team in 2010.
Read My Articles

Horsepower delivered to your inbox.

Build your own custom newsletter with the content you love from EngineLabs, directly to your inbox, absolutely FREE!

Free WordPress Themes
EngineLabs NEWSLETTER - SIGN UP FREE!

We will safeguard your e-mail and only send content you request.

EngineLabs

EngineLabs

We'll send you raw engine tech articles, news, features, and videos every week from EngineLabs.

EngineLabs

EngineLabs NEWSLETTER - SIGN UP FREE!

We will safeguard your e-mail and only send content you request.

EngineLabs

EngineLabs

Thank you for your subscription.

Subscribe to more FREE Online Magazines!

We think you might like...


LSX Mag
Late Model LS Vehicles
Dragzine
Drag Racing
StreetMuscle
Muscle Car & Hot Rods

EngineLabs

Thank you for your subscription.

Subscribe to more FREE Online Magazines!

We think you might like...

  • LSX Mag Late Model LS Vehicles
  • Dragzine Drag Racing
  • Street Muscle Mag Muscle Car & Hot Rods

EngineLabs

EngineLabs

Thank you for your subscription.

Thank you for your subscription.

EngineLabs

Thank you for your subscription.

Thank you for your subscription.

Loading