Get rid of power-sapping blow-by and poor efficiency under the hood with a new high-volume blowoff valve from GZ Motorsports. The design is tough and lightweight, using 6061 billet aluminum construction, and comes ready to activate at 2 psi or less to negate the effects of unnecessary air flowing into the intake.
Official Release:
GZ Motorsports LLC is proud to announce our new high volume pressure relief or blow off valve. Made from 6061 Billet Aluminum stock, it is a two piece adjustable valve that relieves pressure in the engine from excessive blow by. It is activated at below 2 psi pressure. The part number is VCB100B which consists of a base with a nylon washer and nut that can be installed in a standard grommet hole in a valve cover or placed in a valley pan and a top that may be removed to replace the spring of Teflon ball inside. The top has an o-ring between it and the base to which is attached. Once the valve is activated the blow-by gases are vented through a fitting in the top which may be routed to a catch can or other means of containing fluids in the gases.
A pressure relief valve (blow off valve) is essential for any blown or power added high performance engine with a Vacuum Pump or limited breathing. It is wise to install one on engines with Vacuum pumps as well do to very limited breathing when the pump is not functioning.
Features:
- Made from 6061 billet aluminum
- Two-piece adjustable valve
- Activated at below 2 psi pressure